Linear Speed of Sand Mill

/
The linear speed of is often called the speed of the sand mill,…

What Is ZTA Ceramic?

/
ZTA is Zirconia Toughened Alumina, which can also be called composite…

Preparation and Properties of Black Ceramic Ink

/
Researches of successfully prepared black ceramic ink with grinding dispersion method and the effect of different grinding time on ink properties have shown that black ceramic ink with average particle size of 200-300nm can be prepared within 1.5h of grinding time, which meets the requirements of inkjet printer.

Characteristic requirements of ceramic targets

/
In order to improve the sputtering efficiency and ensure the quality of the deposited film, a large number of experiments show that the main characteristics of sputtering ceramic target have the following requirements...

Processing difficulties and analysis of suspension agent

/
The problems commonly encountered in the processing of pesticide…
Normal loss of zirconium beads and abnormal bead breakage

Normal loss of zirconium beads and abnormal bead breakage

/
To judge whether the damage belongs to the conventional loss, we should first look at the appearance of the medium, the zirconia beads used for a period of time will become smaller, the surface is smooth without edges and corners, which belongs to the normal wear, when the zirconia beads appear edges and corners, flake, shaped is abnormal damage of broken beads.
The function and characteristic of ceramic sandlasting

The function and characteristic of ceramic sandblasting

/
Ceramic sandblasting is sprayed to the surface of the workpiece by high pressure air for impact grinding and fine processing of the surface of the workpiece.Remove impurities, color and oxide layer from the surface.
Weight measurement method for filling grinding medium in a sand mill

Weight measurement method for filling grinding medium in a sand mill

/
Sand mill has vertical sand mill and horizontal sand mill points.Usually, the filling amount of grinding medium of vertical sand mill is about 70% of the effective volume of cylinder, and about 80% of horizontal sand mill.
How to mix the grinding ball in the ball mill

How to mix the grinding ball in the ball mill (material, weight, specification)

/
The choice of grinding ball material mainly depends on the ball grinding tank, general grinding ball and ball grinding tank material is the best choice, when the grinding material is suitable for the use of some material of the ball grinding tank, the material of the grinding ball can be determined, when the grinding ball material can not be the same as the ball grinding tank, generally for the following combination...
How to select the particle size of zirconia beads in the sand mill

How to select the particle size of zirconia beads in the sand mill

/
The size of zirconia beads determines the number of contact points and materials. The more contact points of beads with small particle size under the same volume, the higher the theoretical grinding efficiency;On the other hand, when grinding materials with relatively large initial particles, for example, for 100 micron slurry, D=1mm beads may not be used, because the impulse of small beads cannot reach the energy of full grinding dispersion, at this time, large particle size beads should be used.
The advantages of zirconia beads used for grinding

The advantages of zirconia beads used for grinding

/
Zirconia grinding ball is a kind of high strength, inert, hard,…